Engineering plastics – MC nylon slider, replace steel with plastic, and use CNC machining center to punch holes with high precision! MC nylon sliders are anti-vibration, impact-resistant and wear-resistant. It is a trend to replace metal materials.Nylon CNC machining centers can mill and punch holes! MC nylon sliders are engineering plastics. Substituting plastic for steel […]
What is the injection molding temperature of POM material? As a commonly used engineering plastic, POM has a wide range of uses. Various fastening parts, wear-resistant, high rigidity, and steel-like products can be manufactured using POM materials. However, for newcomers to injection molding or customers who have not used POM material injection molding before, it […]
PPS anti-static conductive is based on PPS raw material, adding carbon fiber, carbon black, metal fiber, permanent anti-static masterbatch, etc. ) shielding and other functions, anti-static PPS has ultra-high rigidity, high hardness, mechanical strength, good dimensional stability, creep resistance, heat resistance can be used in the (80-230 degrees Celsius range) wear resistance, chemical corrosion resistance, […]
Static electricity generated on the surface of plastic may cause various problems, such as hindering production, sparks that cause explosions and damage to integrated circuits of electronic equipment, and the method of eliminating static electricity should be combined with the actual production, the purpose of the packaging material (what product to pack), and the customer’s […]
ABS and PMMA have good confidentiality. If the content of acrylonitrile in ABS is properly adjusted, alloys with better compatibility can be obtained. In addition, if the rubber particle size in ABS is appropriately adjusted so that the refractive index of the rubber phase and the master batch phase are close to each other, an […]
According to the statistics of China Mould Industry Association, plastic moulds have become the most important mould products, accounting for 45% of the total domestic mould output value. At present, the operating characteristics of my country’s plastic mold industry mainly include: 1. High regional concentration The development of the mold industry requires certain upstream and […]
PMMA is commonly known as plexiglass, acrylic and so on. The chemical name is polymethyl methacrylate. Due to the disadvantages of low surface hardness, easy rubbing, low impact resistance, and poor molding flow properties of PMMA plastic raw materials, the modification of PMMA has appeared one after another. Such as the copolymerization of methyl methacrylate […]
PC transparent plastic raw materials and different polymers form alloys or blends to improve material properties. Specifically, PC/abs alloys, PC/ASA plastic raw materials, PC/PBT alloys, PC/PET alloys, PC/PET/elastomer blends, PC/MBS blends, PC/PTFE alloys, PC/PA alloys, etc. , Benefit the performance advantages of two materials and reduce costs. For example, in PC/ABS alloys, PC mainly contributes […]
Plastic raw materials have developed rapidly this year, and the annual growth in global demand for plastics and biodegradable plastics is forecast to reach 19%. Domestic biodegradable agricultural film has been tested in Xinjiang, and the formulation of domestic biodegradable agricultural film standards is also in the pipeline recently. The development of the industry is […]
Output = displacement of last thread +/- pressure flow and leakage. The displacement of the last flight is called positive flow and depends only on screw geometry, screw speed and melt density. It is regulated by the pressure stream, which actually includes the drag effect (indicated by the highest pressure) that reduces the output and […]
